Posted on 8th Apr 2012 @ 11:05 PM
MOULD AND MILDEW REMOVER HOW TO CLEAN
Mould And Mildew Remover contains only a maximum of 2.0% Sodium Hypochlorite.
Contains No Phosphates No Salts
Non Hazardous According to Criteria of Worksafe Australia
Not Dangerous Goods According to Transport Regulation
A mildly alkaline solution whose action is brief and immediate because of its combination of organic matter. Also acts as a sterilizer, bactericide, fungicide, disinfectant and kills germs.
KleanMould removes mould and mildew from most sealed surfaces. Use on ceilings, internal and external painted walls, wallpaper, shower screens, prams strollers, annexes, tents, boat canopies, outdoor furniture, eaves, rails, guttering, painted timber (patios, fencing)etc.
Spray KleanMould onto dry surface and leave. After approximately 3 to 5 minutes all traces of mould and mildew will have disappeared. Wipe off excess moisture with a clean damp rag or rinse off if required. Heavily effected areas may require a second application. No scrubbing is required. For very heavy effected areas try our KleanALGAE - Black Mould Remover
CEILING, WALLS AND WALLPAPER.
Most effective method for ceilings and walls is to sponge the KleanMOULD on, reducing waste created by fallout from spraying. We recommend a squeegee mop, window applicator or similar. Working steadily covers all areas. After all traces of mould have disappeared clean the mop with fresh water and with the damp sponge slightly, wipe off excess of moisture. We recommend spraying KleanMOULD on wallpaper for best results. Work from the bottom up to prevent streaking. Streaking occurs when spraying begins at the top and excess product runs down the walls leaving clean lines. To eliminate streaking, spray the entire area beginning from the bottom and working up. Once the area has been cleaned and all traces of mould have disappeared, wipe area well with a clean colour fastness first.
Because shower curtains are waterproof both sides must be sprayed to eliminate mould. Work with a dry curtain spraying well to cover all mould. We recommend spraying the curtain late at night. The next morning the curtain will be clean. Bathroom silicone is generally a difficult problem because mould forms beneath the silicone and is protected by it, spray each morning and night for one week to remove mould. KleanMOULD will penetrate the silicone and the mould will disappear. To treat always begin with a dry surface, excess water will dilute KlenMOULD
ANNEXES, TENTS AND BOAT CANOPIES
Because annexes and tents are usually waterproof both sides will need to be treated. Begin from the bottom and work up to prevent streaking. Spray KleanMOULD evenly. Wait few minutes for mould to disappear. Reapply to any areas you may have missed remembering to apply to both sides then hose down annex or tent well and allow to dry before storage. Boat canopies most often form mould on the underside. Spray entire area liberally and when all traces of mould have disappeared hose thoroughly. All annexes, tents and boat canopies must be tested for colourfastness first.
OUTDOOR FURNITURE, PRAMS AND STROLLERS.
Spray liberally onto effected area and wait 3 to 5 minutes. Cushions should be sprayed from both sides. Because these are items we sit on and serve food on hose down thoroughly and leave to dry. Heavily affected areas may require further applications. Use the same procedure for prams and strollers but remember to check for colourfastness first and to hose thoroughly when complete.
OUTDOOR WALLS, EAVES, GUTTERING AND RAILS.
Use window applicator or spray affected areas liberally. The reaction is instant leaving the surface looking pristine and freshly painted. (Painting will still be required if the paint is cracked, peeling or scuffed) wipe excess moisture off
Although not designed for this purpose KleanMOULD is brilliant for cleaning smoke stains usually occurring on walls and ceilings. Visible as a general yellowing of paint, some stains will occur right through the home but are most visible in the kitchen, due to general cooking and the lounge room due to smoking. Using a sponge or window applicator will remove most of the stains. The reaction is instant leaving the surface looking pristine and freshly painted. (Painting will still be required if the paint is cracked, peeling or scuffed) wipe excess moisture off using a clean dry cloth.
THE MOULD AND MILDEW REMOVER IS FRIENDLY
EASY TO USE